---
title: How to remap the paddles?
description: "Here’s your short guide to help you remap and set up the back paddles of PS5, PS4 and Xbox AIMController.   ## **PlayStation 5 Controllers** [How to REMAP PS5 | AIMControllers PS5 remapping guide](https://www.youtube.com/embed/y2FPUqVWmSg?start=2&feature=oembed&enablejsapi=1&origin=https://us.aimcontrollers.com) 1. Plug the USB cable into…"
url: "https://us.aimcontrollers.com/knowledge-base/article/how-to-remap-the-paddles/"
updated: "2024-10-03"
category: Instructions
---

# How to remap the paddles?

Here’s your short guide to help you remap and set up the back paddles of PS5, PS4 and Xbox AIMController.

 

## **PlayStation 5 Controllers**

[How to REMAP PS5 | AIMControllers PS5 remapping guide](https://www.youtube.com/embed/y2FPUqVWmSg?start=2&feature=oembed&enablejsapi=1&origin=https://us.aimcontrollers.com)

1. Plug the USB cable into the controller while plugged into your PS5 or PC.
2. Press & hold both (left and right) bottom paddles at the same time for 5 - 10 seconds to enter remap mode.
3. Press & hold the paddle and button that you would like it to correspond to for 2 - 3 seconds. (Example: press the bottom left paddle together with ‘X’ and hold for 2 seconds.)
4. Repeat step 3 for all the paddles.
5. Press & hold bottom two paddles for 6 - 10 seconds to exit remap mode.

Each button of the PS5 controller is able to be mapped to a paddle EXCEPT L2 & R2.
 *Note there is no light or indication you are in remapping mode*

## **PlayStation 4 Controllers**

[How to REMAP PS4 | AIMControllers PS4 remapping guide](https://www.youtube.com/embed/mZ5KZWMRtoA?feature=oembed&enablejsapi=1&origin=https://us.aimcontrollers.com)

1. Plug in USB cable into controller.
2. Press & hold the Touchpad button for 5 seconds. After 5 seconds, the PS4 LED will begin to slowly blink – You may release the Touchpad button.
3. Press any of the buttons you want to re-map. The LED will blink indicating the button press was registered.
4. Press any of the paddles. LED will blink again indicating the re-mapping was successful.
5. If you want to continue re-mapping more buttons, go back to step 3; otherwise go to step 6.
6. Once you are done re-mapping, press the Touchpad button. The slow blink will stop.You can remap up to 12 buttons: X, Circle, Triangle, Square, Up (U),Down (D),Left (L),Right (R),L1,R1,Left Joy Stick Push Button (LJ),Right Joy Stick Push Button (RJ)

## Xbox Controllers

1. ⁠Turn the controller on and connect it to the console.
2. Press and hold the left view button for 4 seconds. After 4 seconds, you may release the button - the remapping mode is on.
3. Press the paddle and the button you would like it to correspond to and hold for 2 seconds. (Example: press the bottom left paddle then ‘X’ and hold for 2 seconds.)
4. Repeat the process for each additional paddle.
5. Once you are done remapping, press the left view button again to exit remap mode.